Nickel Plated Fittings

Used to cap unused 1/8" NPT Male ends.

This part usually goes between the solenoid and the needle valve. The 1/8" male is threaded into the solenoid manifold and the needle valve threads into the 1/8 female end. Made of Nickel Plated brass.

Used to connect a female port to a make pipe fitting at a 45° angle. Best for use with regulators with output ports in the 7 o'clock position.

This part usually goes between the solenoid and the needle valve. The male 1/8 is threaded into the solenoid manifold and the needle valve threads into the 1/8 female end.

This part is used to plug unused 1/8" Female ports.

1/8" NPT Male to 1/4" NPT Female. Can be used to adapt a cga-320 nipple to smaller lecture bottle regulators which has 1/8" NPT inlet ports.

1/8" Male NPT Pipe Nipple. 1.5 inches long.

This part is used to connect to female threaded components together.